Prospectus

Return to Table of Contents Volunteer to help write Position Paper

PPP-6 Column Draw-Offs

Traditional Research Idea

Expected Benefit to Members: Side and bottom draw offs are seldom-analyzed components of columns which, when improperly designed and specified, may lead to costly startup problems or operating bottlenecks. Well researched design correlations will aid the designer in correctly sizing these critical components. Present Situation and Proposed Research: It is proposed that all tests be done in the 4-foot section of the low-pressure column. Tests would be performed using the iC4/nC4 system at 165 psia (a high vapor density system) and o/p xylene (a low vapor density system). The program will include a review of the results of the sponsored research project recently completed with Oklahoma State University to ascertain if any research results obtained in the program might be applicable. A literature search will be conducted to review the numerous published articles relating to the design of ancillary column details. The FRI Design Practices Committee will be called upon to provide their input and guidance in structuring the details of the program. No simulator work is proposed due to the uncertain effects of surface tension and viscosity on the experimental results. Proposed Internals and Test System: Existing FRI sieve trays and packing with specially constructed draw off sumps.

Estimated Unit Time: Two weeks per device (trays and packing), total of four weeks. Estimated Additional Costs (Beyond Unit Time): Unknown

PROSPECTUS

Page | 73